Home » Digital Camera

Important Procedures You Need To Find Out About CNC Machine

21 February 2011 No Comment

A CNC machine can’t function without a program. And a program cannot make its way towards the machine without an effective data system. So, what are the methods of data transfer and how effective could they be in conveying data in one point to the next?
Punched mp3
The first data transfer method is the punched tape. It consists of a long strip of document with holes punched in it to store data. The openings represent a set of data which tells the machine how to transfer and what to do. 
This method has proven to be very versatile and incredibly useful. It has proven to withstand the test of time as numerous permanent magnetic storage devices have damaged over time even to the degree of being unreadable while punched tape has been shown to be fine decades and perhaps even centuries later on. Repair is also not a problem as specially designed splices can put two end together virtually the same. Furthermore, punched tape could be visually decoded should the need occur. This means that human accessibility can also be not a problem.
Floppy Disk
While punched tape is quite a long roll of paper, a floppy disk is a little magnetic storage device that’s more space efficient than punched tape. It can also be used to store simple programs.
Floppy disks virtually revolutionized the way data might be stored and transferred in one point to another. It allowed users to store and transfer information faster than punched mp3 allowed. Furthermore, the data inside a floppy could be easily edited at any point as long as you have the correct program to read it. Nevertheless, this method has proven to be quite problematic in the long run as floppies tend to degrade alarmingly fast. A floppy could be unreadable after only 3 years.
RS232
This method is actually a set of standards for serial binary indicators that connects between computers, terminals, and modems. This is a fast and efficient way to transfer data.
This cable links a CNC machine to a computer that has floppy disk support therefore eliminating the need for punched tape. This allows the operator in order to input data remotely and even while accomplishing other tasks. However, it need to be utilized in conjunction with an effective data storage space device so as to have backups in case of emergencies. 
Networks
Systems are a set of computers that are connected together to make data discussing easier. In an industrial situation, networks allow a number of different customers to individually create a program for the machine to run on. 
This method allows multiple users to access and transfer information remotely. This allows for a faster and more efficient check-and-balance system for the programmer and the data verifier. In addition, different parts of the program can be completed by different programmers and then compiled by one user. This makes program creation a fast and simple process.
Manual Data Enter (MDI)
MDI allows users to enter commands directly into the CNC machine’s memory. This may appear to be an effective way of telling the machine what to do but it actually provides extensive drawbacks to it.
Despite this being the fastest way of telling the machine what to do, it is also an extremely risky and tedious operation as it requires the use of the machine’s fatal. Furthermore, the construction of a program is not as fast as opposed to the network technique. It only allows 1 user to access the machine therefore making it a long and drawn-out procedure.
Another disadvantage that comes with MDI is the fact that it limits the owner to only one task at a time. However, MDI allows the most control over the machine compared to additional methods. Get to know more about they at http://cncinformation.com/. 

Leave your response!

You must be logged in to post a comment.